| TROUBLE |
CAUSE |
REMEDY |
| LCD SCREEN DISPLAYS FAULT OR RED LIGHT BLINKING
OR BLANK SCREEN |
 Possible electrical malfunction of CPU or
circuit. |
| Depress RESET button to test
unit. |
| Replace unit as
necessary. |
|
| UNIT WON'T OPERATE |
| Battery Pack missing, faulty or
incorrectly installed. |
| Old Battery Pack not replaced during
changeover |
|
| The Battery Pack must be replaced with
each changeover. |
| Ensure Battery Pack is correctly
installed. |
|
| LOW BATTERY INDICATION |
| Battery Pack expired (low
bettery) |
| An unusual storage condition may be
encountered (Temperature or Humidity) |
| Damaged Battery Pack |
| Extreme environment (e.g. exceed
-15°C~+60°C:
5~140°F) |
|
| Replace Battery Pack |
| Store Battery Pack in a cool and dry
place |
| Prevent impact damage |
| Ensure operating enviornment meets
requirements. |
|
| BACK PRESSURE SENSING CAPABILITY |
| Over lubrication occurring |
| Grease blockage |
| Excessive back pressure |
| Extreme operating temperature (e.g.
exceed -15°C~+60°C:
5~140°F) |
|
| Confirm correct dispensing
rate |
| Check lube line and bearing
history |
| Determine casue and rectify |
IMPORTANT :
To clear I-con for the back pressure
sensing capability, press TEST button for 2
second. If not clear I-con, then please contact
local
suppliers |
|
| UNIT WON'T DISPENSE GREASE |
| Grease Pouch incorrectly
fitted |
| Grease Pouch Empty |
| Loose spring or pressure
plate |
| Grease hardening due to cold
temperature |
|
| Fit Grease Pouch correctly |
| Replace Grease Pouch and Battery
Pack |
| Refit spring or pressure
plate |
| Use appropriate grease for operating
environment |
|
